Connect the belt using the buckle.
Pull the
BROWN HANDLES
away from each other until the buckle secures.
You will hear an audible click. Fasten excess belt in place by pressing it down
on the Velcro. You may hear a second click once the belt is secure. In case of
prolonged use, monitor patient’s skin.
When used as a pelvic sling, the SJT should remain firmly attached to the
patient while in the MRI room.
TO REMOVE
, unbuckle the belt.
Remove objects from patient’s pockets or pelvic area. Slide the belt without the
TCD underneath the patient at level of the trochanters (hips).
Rev # SJT-203-05
WARNING:
The SAM
®
Junctional Tourniquet
is intended to be left on for up
to four hours. Remove only at a Definitive Care Facility. Additional hand pumps
may be necessary with changes in altitude.
Note
: If altitude change is a concern, a syringe can be used to fill the TCD with
water, saline, or other non-compressible fluid.
,
,
Part No.
Description
SJT 102
SJT, 2 TCD, Ext Hand Pump Aux Strap
SJT 101
SJT, 1 TCD & Hand Pump
SJT 100
Pelvic Sling
TO IMMOBILIZE A PELVIC FRACTURE
Part No. SJT 102, 101, 100
FOR BATTLEFIELD & TRAUMA INJURIES
NSN# 6515 01 618 7475
27350 SW 95th Ave Ste 3038
Wilsonville, OR 97070 USA
503.639.5474 |
sammedical.com
SAM Medical Products
®
Emergo Europe
Prinsessegracht 20, 2514 AP,
The Hague, The Netherlands
A single-use device
