EN
23
TROUBLESHOOTING
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If your device shows the other symptoms that
those described above, please call the service
after sale of the shop a retailer.
Symptom
Cause
Solution
The appliance does not
work
There is no power supply
1. Check the plug connecting it others appliance, or verify that the
appliance is connected to the plug
The fuse doesn’t work
1. Replace the fuse
The appliance makes a lot
of noise
1. The appliance is too close to the wall, or is not
stable, or the accessories inside the refrigerator are
placed in wrong position
1. Stabilize the base of the refrigerator by adjusting the position
of feet, take away the device of the wall, place correctly the
accessories inside the refrigerator
The appliance doesn’t cool
enough
1. The door is too often opened or was left opened for
a long time
2. The refrigerator is too close to the wall
3. The refrigerator is too full
4. The temperature is badly, adjusted
1. Close the door and do not open it too much frequently
2. Take away the device of the wall to favor the ventilation
3. Remove food of the device
4. Turn the knurl of regulation of temperature on "3" or more
There are smells in the
appliance
1. Food made obsolete inside the refrigerator
2. The inside of the device at need to be cleaned
1. Throw away obsolete food and wrap the other
2. Clean the inside of the refrigerator
The following symptoms are not breakdowns:
The noise of the cooling liquid which circulates
in pipes can be heard, it is normal.
The humidity on the surface outside of the
device during the wet seasons is not a problem
of the device; you just need to wipe it with
a dry soft cloth.
The compressor and the condenser can warm
more during the periods of strong heat.
The frame of the door is a bit hot; it means
that the condenser works to evacuate the
humidity of air.
TECHNICAL SPECIFICATIONS
We decline liability for any damage or accident
derived from any use of this product which is
not in conformity with the instructions conta
-
ined in this booklet.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this
product should not be disposed
with other household wastes thro
-
ughout the EU. To prevent possible
harm to the environment or human
health from uncontrolled waste di
-
sposal, recycle it responsibly to promote the
sustainable reuse of material resources. To re
-
turn your used device, please use the return and
collection systems or contact the retailer where
the product was purchased. They can take this
product for environmental safe recycling.
NOTE! MPM AGD S.A. RESERVES ITS RIGHT TO MODIFY THE TECHNICAL DATA.
PSC-WG-1030B_instrukcja_v03.indd 23
PSC-WG-1030B_instrukcja_v03.indd 23
12.02.2021 12:31:34
12.02.2021 12:31:34