EN
40
GAS SUPPLY REPLACEMENT AND INSTALLATION GUIDELINES
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
It is the law that all gas appliances are installed
by competent persons in accordance with the
current edition of the Gas Safety Installation
and Use Regulations .
It is in your interest and that of safety to en
-
sure compliance with the law.
In the UK, GASSAFE registered installers work
to safe standards of practice. The hob must
also be installed in accordance with the current
edition of BS 6172. Failure to install the cooker
correctly could invalidate the warranty, liability
claims and lead to prosecution.
GAS SPECIFICATION
Gas type &
pressure
Heat input and orifice size marked(mm)
Wok burner
Semi-rapid
Auxiliary-rapid
4.5kW
1.75kW
1.0kW
G20 20 mbar
0.50+0.76+0.96 * 2
1.00
0.78
ELECTRICAL CONNECTION
This appliance must be earthed.
This appliance is designed to be connected to
a 220-240V, 50Hz-60Hz AC electricity supply.
The wire which is coloured green and yellow
must be connected to the terminal which is
marked with the letter E or
by the earth symbol.
GAS ADJUSTMENT
Take precautions on the operations and adjust
-
ments to be carried out when converting from
one gas to another.
All work must be carried out by a qualified
technician.
Before you begin, turn off the gas and electric
-
ity supply to the appliance.
1. Change the injector of the burners
Remove the pan support, Burner lid and
Flame spreader.
Unscrew the injector using a 7mm box
spanner and replace it with the stipulat
-
ed injector for new gas supply.
Carefully reassemble the all compo
-
nents.
After injectors are replaced, it is advisa
-
ble to strongly tighten.
2. Adjustment of
minimum level of the
flame
Remove the knob
from the tap and
place a small bladed
screwdriver in the
centre of the tap
shaft.
The gas rail
seal
G1/2” Female coupler
The gas rail
seal
Ø11.5 Female coupler
Control handle
Tap
Sealing ring
Adjustment
Содержание Masterchef Line Executive PSC-VH-1060
Страница 42: ...N O T E S 44 ...