The safety switch has turned the mill off
:
Possible Cause:
Possible Solution:
Mill-stones smeared:
Dry the grain, clean the mill-stones
Flour spout blocked:
Dry the grain or/and remove flour blockage,
clean flour spout – make sure the flour
container is suitable
Foreign particles in the grain:
Set to coarse and remove
Mill set too finely:
Turn to a coarser setting, turn mill on and
then slowly turn to a finer setting
Mill has become too warm:
Turn the mill off and leave to cool for at
least an hour
Warranty
Thanks to many years of experience, our grain mills are produced and controlled directly in
our factory. We only use selected materials and motors.
However, defects can occur!
Warranty from 1.1. 2016 - 2 years
Terms of Warranty:
The warranty applies to all occurring material or processing defects, and depends on the
choice of the manufacturer to replace, repair or refund the appliance.
It does not include the replacement of consequential damage nor loss due to natural wear
and tear or to damages caused by the use of force and/primero per use or lack of improper
maintenance.
Intervention by any unauthorized persons, who are neither employed by our company nor
authorized by us, results in the warranty becoming invalid. The warranty applies to all
appliances intended for the entire European market.
Fragile parts are excluded from the guarantee. Wood is a living material and small cracks in
the wooden casing may arise. These are not considered to be material defects
.
