Salvislab Thermocenter TC40, Руководство пользователя

Страница: 27 / 37

7 Status Display: Program mode Delayed Program Start
If the programmed Start Date/Time has achieved the Display switches to Ä 8
The „Prog“ LED is on during a programmed operation
Start Date P04
09.09.07 13:10
Here you can see the actual Start Date and Time. Press
T
to get
more information of the Operating Display.
8 Status Display: Program mode Program Running
Set Temp 90.0°C
Act Temp 90.5°C
Here you can see the Set Temperature and the Actual
Temperature of the Program Step. Press
T to get more
information of the Operating Display.
Program 04
Step 01
Here you can see the Program Number and the Step. Press the
T button to get more information of the Operating Display.
Fan 100%
Gradient 2,0°C/M
Here you can see the Fan Speed and the Gradient. Press the
T
button to get more information of the Operating Display.
Hold Time 20:30
09.09.07 14:09
Here you can see the Hold Time and actual Date and Time in the
format DD.MM.YY. This is the last information of the Operating
Display. Press the
T
button to see first display again
If the program has ended a beep tone (5x) will sound and following display will shown:
Status:
Program finished
Status Message can be confirmed by pressing the key.
9 Cancel a running process by ESC Key
A running system is stopped by pressing ESC.
9.1 Safety question when stopping a running system
Stop Process?
Yes No
+/- Select desired answer
accept
If Yes selected: Ä 9.2
If No selected: Ä Back to running status
9.2 Conformation of cancelling a process
Process stopped Display confirms that the running process has been cancelled.
After a few seconds it will return to Main Menu
Ä
1
Copyright© SalvisLab / Edition 191107 - 27 -