There are three scanning modes provided in VIP:
①
Standard Scan: If you cannot map the current network, you can choose to
automatically scan all surveillance and personal computers in current network.
②
Direct Connection Scan: It is good to use this method if the local host has been
connected to the surveillance host via network cable.
③
Manually add: It is good to use this method if you know the surveillance host IP
address and understand the current network condition.
Operation Steps
Step 1:
Connect your PC and the target DVR/NVR to the same local network.
Step 2:
Switch to Network Extraction module by clicking “
”.
Step 3: Choose a scanning mode and VIP will scan your current local network to find
connected DVR/NVR surveillance systems.
Figure 4.2 Network Scan
Step 4:
Click on the target DVR found in the list to establish a connection. There are
