TRV10RFM Instruction Manual
07
1
2
3
4
5
6
Installing the Unit
Remove the battery door
on the side of the unit.
Insert the batteries,
ensuring correct
orientation.
The LED on the unit flashes
green then flashes red
before changing to solid red.
When it is solid red, place
the unit over the radiator
valve using the mounting
ring if needed:
Screw the units nut
(finger tight) to the
radiator valve and check
that the LED is solid red.
The unit is now ready
for pairing to the SALUS
thermostat. You may now
start the pairing process
described on page 8.
Press any button on the
unit to adapt it to the
radiator valve. Once all
adaptation noise and LED
activity has stopped, the
unit is ready to pair with
your wireless thermostat.
See “LED Indications”
on page 12 if the LED
continues to flash.
