52
7.4 Pairing with RX10RF receiver
3
Open the ZigBee network
OR
5 sec.
5 sec.
2
4
7
Press
button for 3 seconds to expand
“SYSTEM TYPE” menu.
5
Use
or
buttons to:
- choose pairing with the RX10RF receiver in
the „RX1” configuration, if the receiver is set as
RX1 (receiver responds to the heating signal
from any thermostat),
- choose pairing with the RX10RF receiver in
the „RX2” configuration, if the receiver is set as
RX2 (receiver responds to the heating signal
from only one thermostat).
Confirm by
button
6
Select your language by
or
buttons and confirm by
button.
Now thermostat is looking for the
signal from the coordinator...
After all you will see the main
thermostat’s display.
1
PLEASE NOTE!
For easier installation, please make sure you have already added RX10RF receiver to your ZigBee network (please refer to the RX10RF receiver manual
instruction).
Close the ZigBee network
OR
5 sec.
5 sec.
3
3
