Salus HTRP-RF(50), Полное руководство пользователя

Страница: 59 / 74

59
8. OPERATING in OFFLINE MODE
8.1 Work modes
Use or buttons to switch
between work modes.
1 2
4 3
Use or buttons set
temperature setpoint.
Confirm by button.
Thermostat will go back to the main
screen after saving the settings.
HTRP-RF(50) offers a few work modes. Frame on a given icon indicates which mode is currently active. In manual mode , or only one
temperature level is maintained. Thermostat follows programmed schedule when AUTO mode is active („A” icon). Detailed description of work modes is
located below:
Example - comfort temperature mode setpoint editing:
- Comfort temperature mode - pre-defined setpoint temperature. Usually set when we are indoors. The highest maintained temperature in
heating mode or the lowest if thermostat works in the cooling system. Acting alone works as a manual mode.
- Standard temperature mode - pre-defined setpoint temperature. Usually set during the day when we are around the house. Acting alone works
as a manual mode.
- Economic temperature mode -
pre-defined setpoint temperature. Usually set at night or when we are out of the house. Acting alone works as a
manual mode.
- Automatic mode temperature (schedule) -
follows programmed schedule. Schedule can be temporarily override with new setpoint
temperature (temporary override mode will be active to the next change forced by schedule, hand icon will be displayed).
- Party mode - this mode sets the comfort temperature for a user-defined time (maximum 9 hours 50 minutes).
- Holiday mode -
this mode sets the frost protection mode for a user-defined time (maximum 99 days).
- Frost protection mode - usually used during extended periods of absence or during the holidays (only available in heating mode).
3