Tel: 886.909 602 109 Email: [email protected]
21
connect the cable connected with the power meter sensor in steps 3) and 4) with the RF input port of the
spectrometer, as shown in the above figure. Click Calibration Spectrum, and when the calibration is completed, it
will prompt that the “IFGainAtten.dc” file will be generated. This file is in the folder with the name of the serial
number created in step 5).
(7)
Keep the connection mode in step 7 unchanged and click the Measure Spectrum, and the compensation
program will carry out S3302 preamplifier OFF and preamplifier OFF data test, the screen will prompt the current
measurement tasks, and it will prompt to generate the “tc.tcdoc” file after the measurement is completed,
as shown in the following figure. When this file and “IFGainAtten.dc” are in the same folder,
the temperature compensation is completed.
5.2 Automatic Test of Indicators
1. Software environment
Name of the software
Version
Description
Windows system
Win7/XP
The compensation software operating environment needs GPIB
driver and Visa library
S3302 AutoTest.exe
1.0.5
Software for automatic test of indicator
NI-GPIB driver.rar
GPIB-USB-HS
NI GPIB driver installation package
visa462full.exe
4.6.2
Visa library installation package
2. Hardware environment
Instrument name
Main technical indicators
Synthesized signal generator
Frequency range: 250 kHz - 50 GHz
Power output: -100 dBm to +15 dBm
Frequency accuracy: ±0.02%
The power level can be calibrated and stored.
It has internal and external AM modes and low frequency output function.
Power meter
Frequency range: 50MHz - 67GHz
Power range: -60 dBm to +20 dBm
Power sensor
Frequency range: 50MHz - 67GHz
Power range: -60 dBm to +20 dBm
Low-pass filter
Cutoff frequency: 1.0 GHz, insertion loss<0.9 dB, off-band suppression>65 dB
Low-pass filter
Cutoff frequency: 6.7GHz, insertion loss<1 dB, off-band suppression>40 dB
Low-pass filter
Cutoff frequency: 18GHz, insertion loss<2 dB, off-band suppression>40 dB
50Ω adapter
Impedance: 50Ω, interface type: 2.4 mm female
Adapter
2.4 mm (f) - 2.4 mm (f)
Adapter
2.4mm(f)-3.5mm(f)
