Tel: 886.909 602 109 Email: [email protected]
28
Appendix 1 Technical Specifications
The technical indexes of S3302 series spectrum analyzer are subject to strict test when ex-factory. The user
can test and verify the device based on the technical indexes in this manual. Main technical indexes of
S3302 are shown in the table below.
Table 1 Technical Specifications of S3302 Series Spectrum Analyzer
Test Item
Technical Specifications
Model
S3302SA/SB/SC, S3302A/B/C/D
Frequency range
S3302SA: 9 kHz - 4 GHz S3302SB: 9kHz - 6.5GHz
S3302SC: 9kHz - 9GHz
S3302A: 9 kHz - 20 GHz S3302B: 9 kHz - 26.5 GHz
S3302C: 9 kHz - 32 GHz S3302D: 9 kHz - 44 GHz
Frequency readout accuracy
(Frequency reading × frequency reference error + 2% × span + 10% ×
resolution bandwidth)
Frequency reference
Frequency reference error:
(Last calibration date × aging rate + temperature
sta calibration accuracy)
Aging rate:
5
10
-7
/year
Temperature stability:
1
10
-7
(-10°C
50°C, relative to 25
5°C) Initial
calibration accuracy:
3
10
-7
Note: The default time elapsed since the last calibration date is one year.
Frequency span
Range: 100 Hz - upper limit of the frequency of the corresponding model;
0 Hz (zero span)
Accuracy: ±2.0%
Sweep Time
Range: 10 μs - 600 s (zero span)
Accuracy: ±2.00% (zero span)
Resolution Bandwidth
Range: 1 Hz - 10 MHz (1-3 times step)
Video Bandwidth
Range: 1 Hz - 10 MHz (1-3 times step)
SSB phase noise
(Carrier 1 GHz, 20
℃
-30
℃
)
S3302SA/SB/SC :
≤-108 dBc/Hz@10 kHz frequency offset
≤-112 dBc/Hz@100 kHz frequency offset
≤-118 dBc/Hz@1MHz frequency offset
≤-129 dBc/Hz@10MHz frequency offset
