Press the green Play/Pause button
to immediately start the Timer.
The Enso Ring will immediately
disappear and then gradually fill in as
the current Interval counts down.
The on-screen pause icon will disappear
and the play icon will become visible.
Hold down
the << button for more
than a second to delete the
current Interval from the Timer.
A beep will confirm that the current
Interval has been removed. The total Interval
count will be decreased.
Repeat this step to delete additional Intervals.
Momentarily press
the >>
button to increment the
current Interval that is
displayed on the screen. If more
than 1 interval exists the current
Interval count will increment and the
large digits in the middle of the screen
will update to show the duration of the
newly-selected Interval.
Repeat the
momentary pressing
of the
>> button to cycle through all
Intervals in the Timer.
Momentarily press
the <<
button to cycle backwards
through all Intervals in the
Timer.
Hold down
the >> button for
more than a second to insert a
new Interval into the Timer after
the current Interval.
A beep will confirm that a new Interval has
been added. Note that the total Interval
count has been increased.
The current Interval number has also
been advanced.
The duration of this new Interval is
shown in the large digits.
Use the + button to add
time to this new Interval.
Repeat these steps to add
additional Intervals.
Setting the Timer
Add Intervals
3
Start the Timer
4
EX-EC-100-1.1
Review the Intervals in Timer
Delete Intervals
