background image

When cleaning, unplug the unit and remove the ice cubes. Use a diluted solution of water and

vinegar to clean the inside and the outside surface of the Ice maker.

Clean the inside of the ice machine, including the; water reservoir, ice basket, evaporator and

water / ice shovel tray frequently.

Do not spray the Ice maker with chemicals or diluted agents such as acids, gasoline or oil.

Do not immerse in water.

Should you not use the unit for a long period there may be an air block which will not allow the

pump to operate and the ADD WATER light will flash continuously.

-Ensure there is enough water in the unit and press the POWER button again - the machine

will enter normal state.

To ensure ice is clean, please change water in water reservoir everyday. If you are not using

the machine for a long period of time, please drain the water out and clean the unit thoroughly.

Should the compressor stop working due to lack of water or a power supply interruption, turn

the unit off for 3 minutes before switching it back on.

Always use fresh water when using the appliance.

STORING THE APPLIANCE 

Unplug the unit from the wall outlet and clean all the parts as instructed above. Ensure that all

parts are dry before storing.

Store the appliance in its box or in a clean, dry place.

Never store the appliance while it is still wet or dirty.

Never wrap the power cord around the appliance.

TROUBLESHOOTING 

6

Содержание SIMM12













Отзывы: