6
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised
service agent, in order to avoid any hazard. If service becomes necessary within the
warranty period, the heater should be returned to an approved Tedelex Trading (Pty) Ltd
service centre. Servicing outside the warranty period is still available, but will, however,
be chargeable.
CHANGING THE PLUG
Should the need arise to change the fitted plug, follow the instructions below.
This heater is designed to operate on 230V current only. Connecting to other
power sources may damage the heater. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth
Blue
= Neutral
Brown
= Live
PLEASE NOTE: THIS IS A CLASS II PRODUCT AND DOES NOT NEED TO BE
EARTHED
