4
14. A short cord is provided to reduce the hazards resulting from becoming
entangled in or tripping over a longer cord.
15. Ensure that the cord is not in a position where it can be pulled on inadvertently.
16. Do not allow the cord to touch hot surfaces.
17. Use of an extension cord with this heater is not recommended. However, if it is
necessary to use an extension lead, ensure that the lead is suited to the power
consumption of the heater to avoid overheating of the extension cord, heater or
plug point. Do not place the extension cord in a position where it can be pulled on
by children or animals or tripped over.
18. This heater is not suitable for outdoor use. Do not use this heater for anything
other than its intended use.
19. DO NOT carry the heater by the power cord.
20. Do not leave this heater unattended during use. Always unplug the heater when
not in use or before cleaning.
21.
Ensure that the switch is in the “Off” position after each use.
22. The manufacturer does not accept responsibility for any damage or injury caused
by improper or incorrect use, or for repairs carried out by unauthorised
personnel.
23. In case of technical problems, switch off the heater and do not attempt to repair it
yourself. Return the heater to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentioned pre-cautions and instructions, could affect the
safe operation of this heater.
24. DO NOT COVER THE HEATER WHEN IN USE.
OPERATING INSTRUCTIONS
Place the heater on a stable floor surface. Make sure the controls knob is in the Off
“O” position.
Plug the heater into the 230V wall socket.
Rotate the power switch regulator from (fan) to
I
(LOW for 1000W) or
II
(HIGH for
2000W) to choose the desired power.
When you have finished using the heater, turn the control knob to the Off “O”
position. Switch off the wall socket and unplug the heater from the wall socket.
