4
25. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
26. Children should be supervised to ensure that they do not play with the appliance.
27. Do not use the appliance to open cans containing flammable liquids or pressurised
(aerosol-type) cans.
28. Do not operate the appliance in the presence of explosive and/or flammable fumes.
29. Do not operate this appliance by means of an external timer or separate remote
control system.
USING THE CAN OPENER
Raise the can opener lever to upright position. Insert the can so that the lower edge of the
can lip rests on top of the drive wheel. Be certain that the cutting edge is on the inside of the
can lip. Push can opener lever down firmly until fully open.
When the can is fully open, the cutting action will automatically stop. The can will remain in
position until the lever is raised. To release the can, grasp the can firmly in one hand and
raise the lever with the other hand. The magnetic lid holder will retain the lid.
Dented Cans
Occasionally, dented cans will cause the can opener to stall. If this happens, grasp the
dented can and guide it through the cutting action manually until the damaged areas are
passed.
Jammed Cans
To open a can that has become jammed, raise the can opener lever and release the can.
Begin the cutting action again in a new place on the can lip.
OPENING BOTTLES
Be sure the metal lid is clean.
Hold the bottle and put the metal lid to metal hooks.
Pull bottle down to remove the lid.
