Salton JK2073, Инструкция пользователя

Страница: 6 / 10

Setting the Keep Warm Function:
The Keep Warm setting can be used between 40°C to 90°C (104°F to
194°F).
1. Fill the kettle with water (see instruction above).
2. Tap the Keep Warm Button, then tap the + and – Temperature
Selection Buttons to chose desired temperature.
3. Tap the Keep Warm Button again. The Keep Warm Indicator and
the Heating/In Use indicator will come on to indicate Kettle is in the
heating cycle and Keep Warm has been activated.
4. When the water has reached selected setting, the Kettle will beep
3 times and shut off. The Keep Warm Indicator will remain on in the
Display.
While the Keep Warm is activated, the Kettle will cycle on and off for
2 hours to maintain the selected temperature. The Kettle cannot be
removed from the base or the Keep Warm function will be cancelled,
and the display will show the current water temperature in the Kettle.
The Keep Warm function can be deactivated at any time by pressing the
Keep Warm Button. The Keep Warm Indicator will disappear from the
Display once deactivated.
IMPORTANT NOTES
- If the Kettle is removed from the base before the boiling cycle is
complete the heating cycle will be cancelled.
- To turn the Kettle off before the boiling cycle is complete, tap the
On/Off Button.
- The Lid should not be opened while the Kettle is hot or while the
Kettle is in use.
- If you want to use the Kettle again, allow the unit to cool down for
15-20 seconds before turning the Kettle on again.
- Only grip the Kettle by the Handle as all other surfaces will be hot.
- Return the Kettle to the Base or a heat resistant surface after use.
- IMPORTANT: If the Kettle is accidently switched on when empty,
the thermostat will automatically cycle on and off to prevent the
Kettle from overheating. If this situation occurs unplug the Kettle
immediately and allow the Kettle to cool before reusing.
- It is recommended that the power cord be disconnected from the
wall outlet when not in use.
- DO NOT attempt to connect any other appliance to the Power Base
of tamper with the connector in any way.
6