Salton JK2073, Инструкция пользователя

Страница: 5 / 10

- DO NOT use for other liquids besides water. Other liquids will
contaminate the interior of the kettle.
- DO NOT fill past the MAX level printed on the water level window
of the Kettle. Overfilling may cause water to spit out when boiling.
2. Close the Lid. Ensure that it snaps into place.
3. Place Kettle and Base on a flat, level, dry, heat resistant surface.
Ensure that it is correctly engaged on the Base. Direct kettle spout
away from cabinets, wall, etc. to prevent steam damage.
4. Plug into a 120V AC wall outlet. The display will show the actual
water temperature and is now in standby mode. NOTE: If no
selection has been made in 3 minutes, the display will shut off and
the Kettle will enter Sleep Mode. Press any button on the control
panel to “Wake up” the Kettle.
5. Follow the instructions below to either boil water or set the variable
temperature setting.
Choosing Celsius or Fahrenheit:
The default temperatures are in Celsius. To switch to Fahrenheit, press
and hold the On/Off Button for 3 seconds and the Kettle will switch
between °C and °F temperatures.
To Use the Boil Setting:
1. Fill the kettle with water (see instruction above).
2. Tap the On/Off Button. The Heating/In Use Indicator will come on to
indicate that it is in the heating cycle.
3. Temperature Display will increase until it reaches 100°C or 212°F.
4. When the water has boiled, the Kettle will beep 3 times and shut off.
To Use the Variable Temperature Settings:
1. Fill the kettle with water (see instruction above).
2. Tap the + and – Temperature Selection Buttons to chose desired
temperature. The Display will show the temperatures starting from
40°C to 90°C in 10°C increments. Then in 5°C increments between
90°C to 100°C.
5. Once desired temperature is chosen, tap the On/Off Button. The
Heating/In Use Indicator will come on to indicate that the Kettle is in
the heating cycle.
6. Temperature Display will increase until it reaches the selected
setting.
7. When the water has reached selected setting, the Kettle will beep 3
times and shut off.
5