5
5. Gently clean the Foil and Hood and the
Inner Blades with the Cleaning Brush
supplied with the iShave.
6. Reassemble by replacing the Foil and Hood
by lining up the Hood with the outside
edges of the Shaver. Press down gently.
You will hear both sides snap into place.
7.
NEVER CLEAN THE ISHAVE WITH
WATER.
Replacing the Foil and Hood
1. Use only genuine parts that are available at
Salton Canada .
2. The On/Off Switch must be in the Off
position before replacing the Foil and Hood
or the Inner Blades.
3. To remove the Foil and
Hood pull up on each
side and lift off.
4. Reassemble by lining
up the Foil and Hood
with the outside edges
of the Shaver. Press down gently. You will
hear both sides snap into place.
Replacing the Inner Blades
1. Remove the Foil with Hood. (See above
section)
2. Hold the Blade fi rmly at
each end and gently pull
upward to release the Blade
from the Shaver.
SP1410_ShaverBooklet_E.indd 5
1410_ShaverBooklet_E.indd 5
14-03-07 10:04 AM
14-03-07 10:04 A
