3
19. Scalding may occur if the Boiler Cap or Espresso Filter Holder are unscrewed
or removed during the brewing cycle. Wait until the brewing cycle is
complete and all water and steam have been used by the coffee maker.
Open the steam control knob to be sure that there is no longer steam in the
water chamber.
20. Any maintenance other than cleaning should be performed by an
authorized service facility.
21. Do not open the Boiler Cap or remove the Filter Holder while machine is
on, or as long as there is pressure in the boiler. To release the remaining
steam, slowly turn the Steam Control Knob counterclockwise in order to
release the pressure in pitcher of cold water. CAUTION: The steam is
very hot.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not modify the plug in any way.
BEFORE FIRST USE
Before using your 3-in-1 Coffee Center for the first time wash all removable
parts in warm, soapy water, rinse thoroughly and dry. Run water through both
sides of the machine, the filter coffee side and the espresso side. Follow the
directions as described in each section, leaving out the coffee.
Booklet_EX-1091_ENG:Salton Booklet 12/19/08 1:27 PM Page 3
