Filling the Bag
1. Fill the bag. NOTE: If the contents contain liquids, the maximum bag
size should be 8" (20cm) and these should be filled only half full.
2. Ensure that the area to be sealed is completely dry and clean.
Sealing Bag without Air Extraction
1. Place the open end of the bag over the Sealing Wire making sure that the
Polyethylene Film lies flat.
2. Close the Cover and press both areas marked ‘Sealing’.
3. The bag is now sealed.
Sealing Bag with Air Extraction
1. Place the open end of the bag over the Sealing Wire with the lower edge
of the bag under the Suction Nozzle and the upper edge of the bag over
the Suction Nozzle.
2. Close Cover.
3. Press Cover on the right side only, over the word ‘Suction’. The Bag will
begin to collapse as the air is being vacuumed out.
4. Once the air has been vacuumed out of the bag, press the Cover in the
areas marked ‘Sealing’. (See #4 in ‘Produce the Bag Section’)
IMPORTANT: DO NOT EXTRACT AIR FROM BAGS CONTAINING LIQUID.
THE LIQUID WILL BE DRAWN INTO THE SUCTION NOZZLE AND WILL
DAMAGE THE SEALER.
4
