3
Connect the plug into a power outlet. Press down the On/Off switch, the indicator will
light up. Then the kettle will start to boil the water, once the water has being boiled the
On/Off switch will be off automatically. You can shut off the power by lifting the On/Off
switch at any moment during boiling water. If you want to boil water again, only press
down the On/Off switch directly to restart the kettle.
NOTE: Ensure that the On/Off switch is free of obstructions and the lid is firmly
closed, the kettle will not turn off if the switch is constrained or if the lid is
opening
.
Your kettle will reach boiling point, and switch off automatically. To re-boil, simply wait
a few seconds then reset the ON/OFF switch.The kettle will not re-boil until the
On/Off switch
is pressed down again
Note: Never overfill with water, as this may prevent the kettle from switching off.
Boil Dry Protection
A safety cut-out device will automatically operate, should the kettle be accidentally switched
‘ON’ without any water, or without sufficient water to cover the element, or by if the water
dries out. Should the cut-out device be activated, allow your kettle to cool for a few minutes
before refilling, to permit this device to reset. This safety protection is applicable to all
models.
CLEANING AND MAINTENANCE
1. This appliance is for household use only and is not user-serviceable.
2. Do not open or change any parts by yourself. Please refer to a qualified electrical service
department or return to the supplier if servicing is necessary.
3. Always remember to unplug the unit from the electrical outlet when not in use and before
cleaning. Ensure that the speed control is set to “0”.
4. It is much easier to clean the accessories directly after they have been used. Wash them
in warm, soapy water, rinse and dry well.
5. The body of the appliance and the stand should be cleaned with a damp cloth. Do not let
water enter the appliance or the stand.
6. Do not use bleach or other abrasive substance or solvents to clean your appliance as it
can be damaging to the finish.
7. Do not immerse the appliance in water or any other liquid, or hold it under a running tap
to clean.
8. To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in
soapy water or mild non-abrasive cleaner. Rinse and dry a clean, dry, soft cloth.