2
24. The manufacturer does not accept responsibility for any damage or injury caused by
improper or incorrect use, or for repairs carried out by unauthorised personnel.
25. In case of technical problems, switch off the machine and do not attempt to repair it
yourself. Return the appliance to an authorised service facility for examination, adjustment
or repair. Always insist on the use of original spare parts. Failure to comply with the above
mentioned pre-cautions and instructions, could affect the safe operation of this machine.
ADDITIONAL SAFEGUARDS
1. Do not open the lid when the water is boiling.
2.
Never fill above the “MAX” mark, and always ensure that there is enough water to cover
the element.
PARTS DIAGRAM
OPERATING INSTRUCTIONS
Before the first use, please follow these instructions:
Position the kettle on a dry, smooth level surface, and adjust the cord to the desired
length.
Fill the kettle to the ‘MAX’ level. Boil. Discard the water. Repeat this twice.
To fill the kettle, remove it from the power base and open the lid by pressing the lid
release button, fill with the desired amount of water, and then close the lid.
Alternatively, the kettle may be filled through the spout. The water level should not
exceed MAX marks or sit below MIN level. Too little water will cause the kettle
switching off before the water has boiledThe water must be between 400ml (2 cup)
and ‘MAX’. Be economical: do not boil more water then needed.
To improve the quality of your drinks always use fresh water.
Ensure the lid is closed properly.