OWNER’S MANUAL V.032022 ENGLISH
M-9540 BIKE KOR
This manual can be downloaded from the customer area on
www.salter.es
ASSEMBLY INSTRUCTIONS
STEP 2 – Seat & Adjustment Bar Assembly
NOTE:
a. For shipping purpose, 2pcs
Bolts (M6xp1.0x10mm)(128)
are pre-secured on the
Seat Lower Case (66).
b. For shipping purpose, 4pcs
Lock Washer (M8)(97)
and 4pcs
Thin Nylon Nut
(M8xp1.25)(110)
are pre-attached to the back of the
Seat (65)
.
c. Remove 2pcs
Bolts (M6xp1.0x10mm)(128)
from the
Seat Lower Case (66).
d. Remove
4pcs
Lock Washer (M8)(97)
and 4pcs
Thin Nylon Nut (M8xp1.25)(110)
from the back of the
Seat (65)
.
e. Attach the
Seat (65
) to the
Seat Post (67)
and secure with 4pcs
Lock Washer
(M8)(97)
and 4pcs
Thin Nylon Nut (M8xp1.25)(110).
f. Attach the
Seat Lower Case (66)
to the
Seat (65)
and secure with 2pcs
Bolts
(M6xp1.0x10mm)(128).
STEP 3 – Seat Adjustment Bar Assembly
Attach the
Adjustment Bar (74)
to the
Seat Adjustment Lever (71)
to the proper desired position.
To fully secure the
Adjustment Bar (74)
by rotating the
Nut (M8)(106)
in
counterclockwise direction
until completely.
NOTE:
For clear assembly purpose, please notice that the
Nuts (M8)(106)
has
been pre-assembled on the
Seat Adjustment Lever (71)
as the figure shows on the right.