4
IMPORTANT ELECTRICAL REQUIREMENTS
To reduce the risk of electrical shock:
?
·Plug into a grounded 3 prong outlet only. This plug will fit into an outlet only one
way. If the plug does not fit fully in the outlet, contact a qualified electrician.
?
·
DO NOT MODIFY THE PLUG IN ANY WAY.
?
·Do not remove ground prong.
?
·Do not use an adaptor.
?
·Do not use an extension cord.
?
·Failure to follow these instructions can result in death, fire, or electrical shock.
It is important to be sure you have the proper electrical connection:
A 120 volt, 60 Hz. electrical supply, (standard U.S. wall outlet) properly grounded in
accordance with the National Electrical Code and local codes and ordinances, is
required.
For portable use, only use the AC adaptor provided by Salter. Use of any other
adaptor may cause permanent damage.
NOTE: Save these important safety instructions
for future reference.
IMPORTANT SAFETY INSTRUCTIONS
?
·Do not place more than 8 pounds on the adjustable rack, unless it is in the very
lowest position. When the rack is in the lowest position, you may place up to 30
pounds in the Perfect Temp.
?
To protect against electrical shock do not immerse cord, plugs, or the base unit in
water or other liquid.
?
Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts.
?
Do not let cord hang over edge of table or counter, or touch hot surfaces.
?
Do not place on or near a hot gas or electric burner, or in a heated oven.
?
Extreme caution must be used when moving an appliance containing hot oil or
other hot liquids.
?
Always attach plug to the proper socket of the appliance first, then plug cord into
the wall outlet or lighter in your vehicle. To disconnect, turn any control to “off”,
then remove plug from wall outlet or lighter.
?
HOUSEHOLD USE ONLY.
?
DO NOT IMMERSE IN WATER.
