Salter Brecknell
PC 150, Руководство по эксплуатации

Страница: 13 / 13

PC-150 Operation Manual
13
APPENDIX C: Displayed Error Codes
CODE MODE MEANING / POSSIBLE SOLUTION
Normal Operating Mode A weight greater than 102% of the scale’s capacity has
been applied to the scale. Remove the weight from the
platter. Try re-calibrating the scale if this doesn’t solve the
problem. Otherwise, possible load cell damage due to
overloading.
_ _ _ _ _ _ Normal Operating Mode Underrange condition. Platter has been removed. Re-install
platter. Try re-calibrating the scale if this doesn’t solve the
problem. Otherwise, possible load cell damage due to
shock loading.
– HI – Warmup Mode The scale has been turned on with a weight already present
on the platter. Remove the weight and then press the ZERO
key if necessary. Try re-calibrating the scale if this doesn’t
solve the problem. Otherwise, possible load cell damage
due to overloading.
– LO – Warmup Mode The scale has been turned on without the platter installed.
Install the platter and then press the ZERO key if neces-
sary. Try re-calibrating the scale if this doesn’t solve the
problem. Otherwise, possible load cell damage due to
shock loading.
Err 0 Calibration Mode Keyed-in weight value in Calibration Mode is less than 1.5
lb (0.7 kg). Use a larger test weight or re-adjust value.
Err 1
Calibration Mode Keyed-in weight value in Calibration Mode is larger than
150 lb (70 kg). Use a smaller test weight or re-adjust value.
Err 2 Calibration Mode Internal resolution is not high enough to process keyed-in
weight value in Calibration Mode. Verify test weight and
value.
Err 3 All Modes Diagnostics check error - EEPROM Read
Err 4 All Modes Diagnostics check error - EEPROM Write