2
TM
D.
Align the pin brace (Item 4) on the dump body
using the iron brace (Item 3) for exact positioning.
For proper fit, hanger iron brace may require some
minor bending.
E.
Weld the (2) pin braces (Item 4) to the dump
body sides, all around.
F.
Attach the iron braces (Item 3) to the pin braces
on the sides of the dump body and the sides of the
spreader using (2) hairpin cotter pins (Item 5).
G.
If there is a gap between the spreader and the
dump body, weld or bolt a steel strip to the forward
edge of the spreader to cover the gap.
H.
If you have purchased the tailgate side shields
(purchased separately as P/N 924F0106), bolt or
weld them to the inside of the tailgate to prevent
material spillage at the ends of the spreader.
1
2
3
4
5
DUMP BODY
SPREADER
FRAME
Mounting Hardware Installation Drawing
Bill of Materials
1
2
Quick Detach Plate
924F0102
3009526
2
2
Hinge Pin
924F0103
3011139
3
2
Hanger Iron Brace
924F0101
3011137
4
2
Pin Brace
9240021B
3000210
5
6
Hair Pin Cotter 5/32"
HP12
HP12
item qty.
description
carbon
stainless