GB
16
1
2
10
6
3. ASSEMBLY
Step 1:
A.
Using the Spacer (3 ) take Screw, Flat Washer ,Nylon Lock Nut & Dome Nut and connect to
the frame as shown in diagram, In order repeat this all.
* Ensure all nuts and bolts are securely tightened.
B.
Insert Upper Steel Tube(2) into Lower Steel Tube(1) in order, as shown
- Push the spring button and attach the ‘Lower Steel Tube’ to the ‘Upper Steel Tube’
- Once the tubes are attached, ensure the spring button comes out the hole of the tube.
C.
Put the pole sleeve (10) carefully over the steel tubes
D.
Put the Plastic Cap(6) on top of the Upper Steel Tube
1
1
A
B
C
D
A
