background image

               

Eagle Rural Mailboxes 

– 4855E 

Deluxe Mailbox Post Installation Instructions

 

U.S.P.S. APPROVED 

Thank you for selecting Salsbury Industries 4855E eagle rural mailbox.  This instruction sheet is for installing the 4855E mailbox on a Salsbury deluxe mailbox post.  
Other  installation  instructions  are  available  for  installing  the  mailboxes  on  a  standard  mailbox  post  or  on  a  decorative  mailbox  post,  installing  the  mailbox  on 
spreaders, mounting a newspaper holder, and mounting the post in a concrete footing. 

When you install a curbside or roadside mailbox, make sure that it is easily accessible to the mail carrier.  By regulation it should be 41” to 45” from the ground or 
street surface up to the inside floor of the mailbox.  The door should be set back 6” to 8” from the front face of the curb or the road edge.  However, you should check 
with your local postmaster to ensure that the mailbox is installed according to local regulations. 

All hardware required to assemble the mailbox(es) to the deluxe mailbox post is provided with the post.  Each mailbox requires four (4) 5/16”-18 x 2” long pan head 
bolts and four (4) 5/8” nylon spacers to attach to the post arm(s).  The 5/8” nylon spacers are placed between the bottom surface of the mailbox and the top surface 
of the post arm.  Open the front door of the mailbox and install the four (4) 5/16”-18 x 2” long pan head bolts through the four (4) square holes in the inside floor of the 
mailbox, through the four (4) 5/8” nylon spacers (thread onto bolt), and into the four (4) tapped holes in the arm of the deluxe mailbox post.  Additional hardware 
provided is not needed and may be discarded. 

4870 Deluxe Mailbox Post 

Note:    On  the  4870  deluxe  mailbox  post,  the  longer  mounting  arm  which 
accommodates  the  mailbox  can  be  on  either  the  left  or  right  side.    When 
attaching  the  post  to  the  ground,  position  the  post  so  the  longer  mounting 
arm is on the side desired.  Then mount the mailbox on the mounting arm 
with the mailbox facing the street or roadway. 

4872 Deluxe Mailbox Post

 

4873 Deluxe Mailbox Post

 

Note:    On  the  4873  deluxe  mailbox  post,  the  mounting  arms  can  be 
positioned on either side of the vertical post. 

4874 Deluxe Mailbox Post 

Содержание 4855E














Отзывы: