Salora DVD330, Инструкция по эксплуатации, Страница: 25 / 72

PREPARATIONS
1. Accessories
1x remote control, 1x RCA audio cable, 1xHDMI cable , 1x user manual, 2x
remote control battery
(please check if all accessories are present when opening the box).
2. Installation of remote control battery
Place two batteries in the battery compartment. Make sure that the
polarities are correct.
There should be no large obstacles between the remote control and the
main unit.
SYSTEM CONNECTION
When connecting this appliance to other components, make sure that all
the appliances are powered off. Audio/video cables must be connected
according to the different color identifications and should be fitted firmly.
* Yellow to video terminal
* White to audio terminal
* Red to audio terminal
PLAY MODE SETTING
If you find that the picture does not cover the entire screen or if there is no
color, please select PAL, NTSC or auto by pressing N/P.
DVD disc is able to support a picture with different proportions, in TV mode.
It is possible to comply with the proportions of your discs. Select
Normal/Full, wide screen under the system setup. Proceed as below: Press
<SETUP> to go to General Setup, press <PLAY>, use up/down arrow keys to
select TV mode, then press left/right keys to select TV mode, then press
left/right keys to select Normal/Full, wide screen according to your need.
Finally press <PLAY>.
BASIC OPERATION
Once all the connections of the system have been made, this appliance will
be ready for use.
Prior to playing, make sure to complete the following
1. Switch on TV and select AV mode. If it concerns an S-Video connection,
select S-Video mode.
2. Switch on amplifier if connected, select AC-3 or DVD mode.
3. Switch on DVD player.
6