![Salora 50XUS4404 Скачать руководство пользователя страница 47](http://html.mh-extra.com/html/salora/50xus4404/50xus4404_operating-instructions-manual_802594047.webp)
English
- 17 -
Scan Wireless
Networks
Start a search for wireless networks. This option will be available if the
Network Type
is set as
Wireless Device
.
Press WPS on your
wifi router
If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press
OK
. Go to your modem/router device and press the
WPS button on it to make the connection. This option will be available if the
Network
Type
is set as
Wireless Device
.
Internet Speed Test
Start a speed test to check your connection bandwidth. The result will be displayed on
the screen when finished.
Advanced Settings
Change the IP and DNS configurations of your TV.
Wake On
Enable or disable this feature by setting it as
On
or
Off
.
Note: For detailed information on the options of this menu refer to the Connectivity section.
Installation Menu Content
Automatic channel
scan (Retune)
Displays automatic tuning options.
D. Aerial:
Searches and stores aerial DVB stations.
D. Cable:
Searches and stores cable DVB stations.
Analogue:
Searches and stores
analogue stations.
Manual channel
scan
This feature can be used for direct broadcast entry.
Network channel
scan
Searches for the linked channels in the broadcast system.
D. Aerial:
Searches for aerial
network channels.
D. Cable:
Searches for cable network channels.
Analogue fine tune
You can use this setting for fine tuning analogue channels. This feature is not available
if no analogue channels are stored and if currently watched channel is not an analogue
channel.
Installation Settings
(optional)
Displays installation settings menu.
Standby Search (*):
Your TV will search for new or
missing channels while in standby. Any new found broadcasts will be shown.
Dynamic
Channel Update(*):
If this option is set as Enabled, the changes on the broadcasts
such as frequency, channel name, subtitle language etc., will be applied automatically
while watching.
(*) Availability depends on model.
Clear Service List
Use this setting to clear channels stored. This setting is visible only when the
Country
option is set to Denmark, Sweden, Norway or Finland.
Select Active
Network
This setting allows you to select only the broadcasts within the selected network to be
listed in the channel list. This feature is available only for the country option of Norway.
Signal Information
You can use this menu item to monitor signal related information such as signal level/
quality, network name etc for available frequencies.
First time installation
Deletes all stored channels and settings, resets TV to factory settings.
English
- 18 -
System Menu Content
Conditional Access
Controls conditional access modules when available.
Language
You may set a different language depending on the broadcaster and the country.
Privacy Settings (*)
Manage your privacy privileges for smart TV related applications. Press
OK
to enter
the menu and set according to your preferences.
Parental
Enter correct password to change parental settings. You can easily adjust
Menu Lock
,
Maturity Lock
,
Child Lock
or
Guidance
in this menu. You can also set a new
PIN
or change the
Default
CICAM PIN
using the related
options.
Note: Some menu options may not be available depending on the country selection in the First Time
Installation. Default PIN could have been set to 0000 or 1234. If you have defined the PIN(is requested
depending on the country selection) during the First Time Installation use the PIN that you have defined.
Date/Time
Sets date and time.
Sources
Edit the names, enable or disable selected source options. There are also
Regular
,
Enhanced
and
Disabled
options available for HDMI sources.
Regular
and
Enhanced
options are affecting the colour settings of the selected HDMI source. To be able to
watch 4K or HDR/HLG images from an HDMI source related source setting should be
set as
Enhanced
if the connected device is compatible with HDMI 2.0 and subsequent
versions. Set as
Regular
if the connected device is HDMI 1.4 compatible. Set accordingly
or disable the related HDMI source by setting as
Disabled
.
Accessibility
Displays accessibility options of the TV. This option will not be available if no channels
are installed.
Hard of Hearing
Enables any special feature sent from the broadcaster.
Audio
Description
A narration track will be played for the blind or visually impaired audience. Press
OK
to see all available
Audio Description
menu options. This feature is available only if
the broadcaster supports it.
Note: Audio description sound feature is not available in recording or time shifting mode.
Dialogue
Enhancement
This feature provides sound postprocessing options for speech-gated dialogue
enhancement.
Off
,
Low
,
Medium
and
High
options will be available. Set according
your preference.
Note: This feature has an effect only if input audio format is AC-4 and this effect only applies to TV
loudspeaker output.
Netflix
If this feature is supported by your TV, you can view your ESN(*) number and deactivate
Netflix.
(*) ESN number is an unique ID number for Netflix, created especially to identify your TV.
Note:
)RU.YਟGHRVWUHDPਟQJDPਟQਟPXP0EVਟQWHUQHWFRQQHFWਟRQVSHHGਟVUHTXਟUHG±)RUDQ
H[DPSOHRIWKHUHTXਟUHPHQWVIRUVWUHDPਟQJ.FRQWHQW\RXPD\IਟQGPRUHਟQIRUPDWਟRQRQWKH1HWIOਟ[
ZHEVਟWH KWWSVKHOSQHWIOਟ[FRPHQQRGH :KHQ \RX VWDUW WR VWUHDP YਟGHR FRQWHQW YਟD WKH
ਟQWHUQHW WKH TXDOਟW\ RI \RXU FRQQHFWਟRQ ZਟOO EH DQDO\VHG DQG WKH IXOO +' RU . TXDOਟW\ PD\ WDNH D
VKRUWWਟPHWREHUHDOਟVHGRUਟQWKHHYHQWRIDVORZFRQQHFWਟRQQRWEHSRVVਟEOH<RXVKRXOGFKHFN
\RXUਟQWHUQHWFDSDEਟOਟWਟHVZਟWK\RXUਟQWHUQHWSURYਟGHUਟI\RXDUHDWDOOXQVXUH
Device Settings
CEC
With this setting you can enable and disable CEC functionality completely. Press Left
or Right button to enable or disable the feature.
CEC Auto Power
On
This function allows the connected HDMI-CEC compatible device to turn on the TV
and switch to its input source automatically. Press
Left
or
Right
button to enable or
disable the feature.
More
Displays other setting options of the TV.
Menu Timeout
Changes timeout duration for menu screens.
Standby LED
If set as
Off
the standby LED will not light up when the TV is in standby mode.
HBBTV (*)
You can enable or disable this feature by setting it as
On
or
Off
.
Software
Upgrade
Ensures that your TV has the latest firmware. Press
OK
to see the menu options.