Salora 32FSB5002 Скачать руководство пользователя

Страница: 13 / 35

English

- 73 -

Pressing

Rapid advance

button consecutively will

change slow forwarding speed.

Recording Configuration

Select the

Recording Settings

item in the

Media

Browser>Settings

menu to configure the recording

settings.

Format Disk:

You can use the

Format Disk

feature

for formatting the connected USB disk. Your PIN is
required to use the

Format Disk

feature.

Note:

Default PIN can be set to

0000 or 1234

. If you have

defined the PIN(is requested depending on the country

selection) during the First Time Installation

use the PIN that

you have defined.

IMPORTANT:

Formatting your USB drive will erase

ALL the data on it and it’s file system will be converted

to FAT32. In most cases operation errors will be fixed

after a format but you will lose ALL your data.

If “

USB disk writing speed too slow to record

”

message is displayed on the screen while starting a
recording, try restarting the recording. If you still get
the same error, it is possible that your USB disk does
not meet the speed requirements. Try connecting
another USB disk.

Media Browser Menu

You can play photo, music and movie files stored on a

USB disk by connecting it to your TV. Connect a USB
disk to one of the USB inputs located on the side of
the TV. Pressing the

Menu

button while in the

Media

Browser

mode will access the

Picture

Sound

and

Settings

menu options. Pressing the

Menu

button

again will exit from this screen.

You can set your

Media

Browser

preferences by using the

Settings

menu.

Loop/Shuffle Mode Operation

Start playback with the

Play

button and activate

All files in the list will be

continuously played in original
order

Start playback with the

button and activate

The same file will be played

continuously (repeat)

Start playback with the

Play

button and activate

All files in the list will be played

once in random order

Start playback with the

Play

button and activate

All files in the list will be

continuously played in the same
random order.

FollowMe TV (if available)

With your mobile device you can stream the current
broadcast from your smart TV using the

FollowMe

feature. Install the appropriate Smart Center

application to your mobile device. Start the application.
For further information on using this feature refer to
the instructions of the application you use.

Note: This application may not be compatible with all mobile
devices. HD channels are not supported and both of the
devices must be connected to the same network.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the TV.
The

CEC

option in the

System>Settings>More

should be set as

Enabled

at first. Press the

Source

button and select the HDMI input of the connected
CEC device from the

Sources List

menu. When

new CEC source device is connected, it will be listed
in source menu with its own name instead of the
connected HDMI ports name(such as DVD Player,
Recorder 1 etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected.
To terminate this operation and control the TV via
the remote again, press

Quick Menu

button on the

remote, highlight the

CEC RC Passthrough

and

set as

Off

by pressing Left or Right button. This

feature can also be enabled or disabled under the

System>Settings>More

menu.

The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to replace
other cables between the TV and the audio system
(A/V receiver or speaker system).
When ARC is active, TV does not mute its other audio
outputs automatically. So you need to decrease TV
volume to zero manually, if you want to hear audio from
connected audio device only (same as other optical or
co-axial digital audio outputs). If you want to change
connected device’s volume level, you should select
that device from the source list. In that case volume
control keys are directed to connected audio device.

Note:

ARC is supported only via the HDMI1 input.

System Audio Control

Allows an Audio Amplifier/Receiver to be used with

the TV. The volume can be controlled using the
remote control of the TV. To activate this feature set
the

Speakers

option in the

System>Settings>More

menu as

Amplifier

. The TV speakers will be muted

and the sound of the watched source will be provided
from the connected sound system.