salmson Priux home M, Инструкции по установке и запуску

Страница: 35 / 88

Salmson 31
en
Constant speed Recommended for systems with fixed system resis-
tance requiring a constant volume flow.
Constant speed (I, II, III):
The pump runs uncontrolled in three prescribed fixed
speed stages.
Venting
The pump venting function is activated via the function
key and vents the pump automatically.
The heating system is not vented.
Manual restart
A manual restart is activated via the function key and
deblocks the pump as required (e.g. after a prolonged
standstill during the summer).
4 Intended use
The high-efficiency circulators in the Priux home M
series are exclusively designed for circulating fluids in
hot-water heating systems and similar systems with
constantly changing volume flows.
Permitted fluids:
• Heating water according to VDI 2035
(CH: SWKI BT 102-01).
• Water-glycol mixtures* with a maximum of 50 %
glycol.
* Glycol has a higher viscosity than water. If glycol is
added, the delivery data of the pump must be corrected
to suit the mixing ratio.
max
H
min
II
III
I
Q
I II III
NOTE
Only add ready-to-use mixtures to the system.
Do not use the pump to mix the fluid in the
system.