DIGI INFLATOR
43
FOR INFLATABLES
1.
Choose the right adapter and attach it to the connector (Fig. 4).
Close the lever on the universal connector.
2.
For reference and recommendation purposes only, check our TYPICAL AIR PRESSURE
table. Do not forget to consult the user manual for the item you are inflating to know the
exact and recommended pressure.
3.
Attach the nozzle and insert the universal connector (Fig. 5).
4.
Connect the power cord and start the inflator.
5.
When the desired pressure is reached, stop the inflator and disconnect the power cord.
6.
Remove the adaptor from the item you are inflating and remove the adaptor from the
connector.
Fig. 4
Fig. 5
TROUBLESHOOTING
1.
Fine / wide nozzle for inflatables
2.
Needle nozzle for balls
3.
Universal valve connector (open / close)
1
2
3
THE INFLATOR DOES NOT START
1.
Push the power plug into the socket firmly and rotate it back and forth.
2.
Make sure there is no dirt inside the socket. Clear any dirt present by blowing.
3.
Check the fuse in the inflator’s plug. You will need at least 15 Amp and it cannot be
broken.
Содержание DIGI
Страница 46: ......
