SALKI DIGI, Инструкция по эксплуатации

Страница: 42 / 48

DIGI INFLATOR
42
5.
After connecting the air hose but before inflating, check the current pressure to see if
the tyre needs inflating or not. You do not need to start the inflator to check the current
pressure.
6. The device is fitted with a light function, energy saving function and environmental
protection function, especially for nocturnal use. You can always keep the light on, even
during or after its use as an indicator.
7. Press the Settings button (the cog icon)
to change the readout format.
8. Use the + / - keys to pre-select the
desired pressure. Wait three seconds to
leave pre-select mode.
9. The readout shows the current pressure
in real time.
10. Start the inflator using the ON / OFF
button. The inflator will start inflating the
tyre to the pre-set pressure value and will
stop automatically.
11. To start inflating again, you will need to turn off the inflator and switch it back on.
12. It is important not to operate the inflator continuously for more than 10 minutes to
prevent overheating the motor or shortening the lifespan of the product.
13.
When storing the inflator, keep the power cord in the cable box located on the rear of
the product.
14. Keep the air hose in the central groove intended for this purpose.
TROUBLESHOOTING