-20-
INSTALLATION
The installation must be carried out by a suitably qualified person, in
accordance with the with the manufacturer’s instructions, and in accordance
with all local electrical and building rules and specifications.
Before Installation
The appliance is intended for installation into kitchen cabinet or enclosure, it is important to follow
instructions to ensure correct installation. Improper installation will void the product warranty, and
invalidate any claims.
Ensure that the benchtop and oven cavity are completely square and level, and are to the
required specification.
Check that the oven door will be able to open fully without obstruction.
IMPORTANT: The adjacent furniture or housing and all materials used in the installation must
be able to withstand a minimum temperature of 85°C above the ambient temperature of the
room it is located in, whilst in use.
Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage or
discolouration at temperatures below the guidelines given above.
Kitchen cabinets must be set level and fixed. A gap of 5 mm is required between the appliance
and surrounding unit fronts.
Any damage caused by the appliance being installed in contravention of this temperature limit,
or by placing adjacent cabinet materials closer than 5mm to the appliance, will be the liability
of the owner.
If there is a drawer beneath the oven, a shelf must be installed between oven and drawer.
Keep all ventilation slots clear of obstructions.
Carry the appliance with at least two persons, appliance is heavy and requires two persons lift
CAUTION! The door and/or handle must not be used for lifting or moving the appliance, use
the slots or wire handles located at both sides to move the appliance.
DO NOT seal the installed oven with silicon or glue, as this will interfere with future
maintenance