Salicru SLC TWIN PRO2, Руководство пользователя

Страница: 24 / 48

24
SALICRU
Fig. 25. Screen shot of the main screen of ViewPower
monitoring software.
5.2.14. Considerations before commissioning with the loads.
•
It is recommended to charge the batteries for 12
hours at least before using the UPS for first time.
ˆ
To do it, supply the input of the equipment and turn the
input switch «On». The battery charger will be auto-
matically started up.
ˆ
For battery modules.
Those models with extended back up times with one or
more battery modules, the fuse or battery switch has to
be turned «On» too.
•
Although the equipment can work without charging the bat-
teries for stated 12 h, the risk of a long power outage for
the first operating hours must be evaluated, because the
back up time of the UPS will be lower.
•
Do not start up the equipment and loads before section 6
states it.
Nevertheless, when it is started up, it will be done gradu-
ally, in order to avoid possible issues, at least in the first
UPS start up.
•
In case of connecting inductive loads with high consump-
tion, apart from the sensitive loads, like laser printers or
CRT monitors; their worst inrush current will be kept in
mind in order to avoid blocking the equipment.
Depending on the equipment, for this type of loads, which
are considered NON-CRITICAL, the equipment has a pro-
grammable terminal strip. Depending on the setting of that
terminal strip, the power supply will be broken or not in
case of power outage.