General index
1. INTRODUCTION.
1.1. THANK YOU LETTER.
2. SAFETY INFORMATION.
2.1. USING THIS MANUAL.
2.1.1. Conventions and symbols used.
3. QUALITY ASSURANCE AND STANDARDS.
3.1. STATEMENT BY THE MANAGEMENT.
3.2. STANDARDS.
3.3. ENVIRONMENT.
4. PRESENTATION.
4.1. VIEWS.
4.1.1. Views of the device.
4.1.2. Front views of the UPS.
4.1.3. Rear views of the UPS.
4.1.4. Front view of battery module.
4.1.5. Rear view of battery module
4.2. DEFINITION OF THE PRODUCT.
4.2.1. Nomenclature.
4.3. OPERATING PRINCIPLE.
4.3.1. Notable features.
4.4. OPTIONAL EXTRAS.
4.4.1. Isolation transformer:
4.4.2. Exterior manual maintenance bypass.
4.4.3. Communications card.
4.4.3.1. Integration into computer networks using an SNMP adapter.
4.4.3.2. MODBUS protocol.
4.4.3.3. Relay interface.
5. INSTALLATION.
5.1. RECEPTION OF THE DEVICE.
5.1.1. Inspection.
5.1.2. Unpacking.
5.1.3. Checking the contents.
5.1.4. Storage.
5.1.5. Transfer to the installation site.
5.1.6. Preliminary considerations before connection.
5.2. CONNECTIONS.
5.2.1. Connection of the input.
5.2.2. Connection of the output.
5.2.3. Connection to B1 external batteries (backup extension).
5.2.4. Terminals for EPO (Emergency Power Off).
5.2.5. Communication port.
5.2.5.1. RS232 port and USB interface.
5.2.5.2. Smart slot.
5.2.6. Protection against voltage spikes for the modem / ADSL / Fax / ...
line.
5.2.7. Software.
5.2.8. Considerations before startup.
6. OPERATION.
6.1. UPS STARTUP AND SHUTDOWN.
6.1.1. Preliminary checks.
6.1.2. UPS startup with mains voltage.
6.1.3. UPS startup without mains voltage (battery mode)
6.1.4. Turn off the UPS with mains voltage (in inverter mode).
6.1.5. Turn off the UPS without mains voltage (in battery mode).
6.1.6. Battery test function.
6.1.7. Alarm mute.
6.1.8. EPO (emergency power off).
7. CONTROL PANEL WITH LCD DISPLAY.
7.1. GENERAL INFORMATION FOR THE SERIES.
7.1.1.
Information represented by the display.
7.1.2. Common messages shown on the LCD display.
7.1.3. Common abbreviations shown on the display.
7.2. CONTROL PANEL.
7.2.1. Composition of the control panel with LCD display.
7.2.2. Audible alarms.
7.2.3. Location of the adjustment parameters on the display.
7.2.4. Settings.
7.2.4.1. Ah configuration of parameter ‘12’.
7.2.4.2. Operating mode / Description of state.
7.2.4.3. Warning or alert codes.
7.2.4.4. Error or fault codes.
7.2.4.5. Warning or alert indicators.
8. MAINTENANCE, WARRANTY AND SERVICE.
8.1. BATTERY MAINTENANCE.
8.1.1. Notes for the installation and replacement of the battery.
8.2. UPS TROUBLESHOOTING GUIDE.
8.2.1. Troubleshooting guide. Warning indications.
8.3. WARRANTY CONDITIONS.
8.3.1. Terms of the warranty.
