Salicru EQUINOX2 3001-S, Руководство пользователя, Страница: 50 / 82

50
SALICRU
The connection terminals are located at the bottom of the unit,
as shown in the following table:
Item Terminal Note
DC switch On/Off switch
DC input terminal PV Connector
COM1 port WiFi USB module connector
COM2 port CT/RS485 connector
AC output terminal Connection for AC output
Tab. 4. Connection terminals.
4.3. SCREEN INTERFACE
AND WIFI MODULE.
Fig. 10. Synoptic chart view.
Fig. 11. Wi-Fi module view.
Indicator Item Status Description Solution
On
indicator
Off
No voltage detection or input
voltage too low.
Slow
flash
Inverter On, waiting for grid
connection.
Fast flash Grid detected. Self-test mode.
On
Normal, connected to the grid
and generating energy.
OLED
display
On
Displays inverter operation
information.
Off
If there is no response when
pressing the button, the screen is
faulty or not connected properly.
Button (Physical)
Change the information on
the OLED screen and set the
parameters with a short press
and long press (see "7. System
operation.").
Alarm
indicator
On
The communication between
the inverter and the server is
normal. However, the inverter
reports an error.
Check the guide for more information
about common faults and
troubleshooting.
Flash
The WiFi module is not properly
connected to the inverter's
"Com" port.
Check if the WiFi module is connected
properly to the inverter. Remove and
insert the Smart Dongle; Restart the
inverter.
Off
Changed router or password.
The WiFi signal is too weak at
the place of installation.
Remove and insert the WiFi module,
configure and move the router closer
to the inverter. Register the user
account in the application.
Fast flash
(*) The WiFi module is connected to
the router, but not at the server.
Verify that the router has an Internet
connection.
Verify that the firewall is not blocking
port 5743.
On
Off
Communication between
inverter and server is normal.
Communication is normal.
On
(*) Normal for 5 s.
Tab. 5. Synoptic chart elements and WiFi module.