Salford 2015 522 Скачать руководство пользователя страница 6

Страница: 6 / 60

Salford Group Inc.

Page 6

MNP522-30-15A INTL 2015 522 - 30ft Front Half Assembly and Parts Manual INTERNATIONAL

Signal Words

The words

DANGER, WARNING,

CAUTION

are used with the safety alert symbol.

Learn to recognize the safety alerts, and follow the recommended precautions and safe
practices.

Three words are used in conjunction with the safety-alert symbol:

DANGER

Indicates an imminently hazardous situation that, if not
avoided, will cause DEATH OR VERY SERIOUS INJURY

WARNING

Indicates a potentially hazardous situation that, if not
avoided, could cause DEATH OR SERIOUS INJURY

CAUTION

Indicates a potentially hazardous situation that, if not
avoided, may cause MINOR OR MODERATE INJURY

Replace any

DANGER, WARNING, CAUTION,

or instructional decal that is not

readable or is missing. The location and part number of these decals are identified later
in this manual.

The words

Important

and

Note

are not related to personal safety but are used to give

additional information and tips for operating or servicing this equipment.

IMPORTANT:

Identifies special instructions or procedures which, if not strictly observed

could result in damage to, or destruction of the machine, process or its surroundings.

NOTE:

Indicates points of particular interest for more efficient and convenient repair or

operation.

A CAREFUL OPERATOR IS THE BEST INSURANCE AGAINST AN ACCIDENT!

Wing Fold



Wings may fall rapidly causing

injury.



Do not stand under wings.



Always stay clear of wings when

being lowered, raised, or in an
elevated state.



Always use wing locks when

raised.



Ensure cylinders are completely

filled with hydraulic fluid to avoid
any unexpected movement.

Hydraulics



DO NOT

search for high pressure

hydraulic leaks without any hand and
face protection. A tiny, almost
invisible leak can penetrate skin,
requiring immediate medical
attention.



Use cardboard or wood to

detect leaks – never your hand.



Double check that all is clear

before operating hydraulics.



NEVER

remove hydraulic hoses

or ends with machine elevated.
Relieve hydraulic pressure before disconnecting hydraulic hoses or ends.



Use transport/maintenance locks when machine is raised.



Maintain proper hydraulic fluid levels.



Keep all connectors clean for positive connections.



Ensure all fittings and hoses are in good condition and are properly tightened.



NEVER

work on or under an elevated machine unless it has been locked up

using the transport/maintenance locks.

DANGER

06-2015

General Safety Precautions

Return to Contents

Содержание 2015 522





























































Результаты поиска

Содержание 2015 522

Отзывы:

Бренды по названию

Популярные бренды

Salford 2015 522, Сборка и каталог запасных частей

Результаты поиска

Содержание 2015 522

Отзывы:

Бренды по названию

Популярные бренды