32
6. You can decrease the value by touching the "
-
" sensor
(B4
) or increase it by touching
the "
+
" sensor
(B5
) in 5 °C steps. Holding the sensors will change the temperature
value faster.
7. The display will then automatically switch to the factory preset time display of 10
hours and alternate between the temperature setpoint from the previous step and
the 10 hour time value at 10 second intervals.
8. To change the time value, touch the
TIME/TEMP
sensor
(B2
) twice in succession. The
display shows the time value of 10 hours
.
9. Decrease the value by touching the "
-
" sensor
(B4
) or increase it by touching the "
+
"
sensor
(B5
) in 30
-
minute increments. Holding the sensors will change the time value
faster.
10. The
START/STOP
sensor
(B1
) will then flash and the dryer is ready to start drying.
11. Start drying by touching the
START/STOP
sensor
(B1
).
12. If you do not start drying within 1 minute, the
TIME/TEMP
sensor
(B2
) will flash
again on the display. To start drying after an interval of 1 minute, touch the
TIME/TEMP
sensor
(B2
) twice in succession and then start drying by touching the
START/STOP
sensor
(B1
).
The drying process is indicated by the continuous illumination of all sensors and the
alternating display of the set time and temperature at intervals of 10 seconds.
You can end the drying process prematurely by touching the
START/STOP
sensor
(B1
),
which will then flash. The fan will continue to run for 10 seconds after the dryer has
switched off, then the dryer will stop drying.
Drying is automatically stopped after the set time has elapsed. "END" appears on the
display, the
START/STOP
sensor
(B1
) flashes and the dryer beeps 5 times.
Set the temperature and drying time during the drying process:
You can also adjust the temperature and drying time during the drying process.
1. Touch the
TIME/TEMP
sensor
(B2
). The temperature value will flash on the display.
2. To decrease the value in the 35
-
75 °C range, touch the "
-
" sensor
(B4
) or increase it
by touching the "
+
" sensor
(B5
) in 5 °C steps. Holding the sensors will change the
temperature value faster.
3. By touching the
TIME/TEMP
sensor
(B2
) again, the time value will flash on the
display.
Содержание QuickDry
Страница 1: ...MANUAL MODEL VERSION DATE QuickDry l 8 11 2023 CZ SK EN HU RO DE IT SI...
Страница 92: ...92...
