4
| EN
SMARTY XP v2020.3
3. SAFETY INSTRUCTIONS AND PRECAUTIONS
Read these instructions very carefully before installing and using this equipment. Installation, connection and maintenance should be carried out
E\DTXDOL¿HGWHFKQLFLDQDQGLQDFFRUGDQFHZLWKWKHORFDOUHJXODWLRQVDQGOHJLVODWLRQ
7KHFRPSDQ\VKDOOWDNHQRUHVSRQVLELOLW\IRUWKHLQMXULHVRUGDPDJHGSURSHUW\LIWKHVDIHW\UHTXLUHPHQWVDUHQRWIROORZHGRUWKHGHYLFHLVPRGL¿HG
ZLWKRXWWKHSHUPLVVLRQRIWKHPDQXIDFWXUHU
Main safety rules
Danger
•
%HIRUHFDUU\LQJRXWDQ\HOHFWULFDORUPDLQWHQDQFHZRUNVPDNHVXUHWKDWWKHGHYLFHLVGLVFRQQHFWHGIURPWKHPDLQVDQGDOOPRYLQJSDUWV
of the device have stopped.
• Make sure that the fans are not accessible through air ducts or branch openings.
• If any liquids on electric parts or connections that bear voltage are noticed, stop the operation of the device.
•
'RQRWSOXJWKHGHYLFHLQWRWKHPDLQVWKDWGLႇHUIURPWKHRQHLQGLFDWHGRQWKHODEHORURQWKHKRXVLQJ
•
9ROWDJHRIWKHPDLQVVKRXOGFRPSO\ZLWKWKHHOHFWURWHFKQLFDOSDUDPHWHUVLQGLFDWHGRQWKHODEHO
•
7KHGHYLFHVKRXOGEHHDUWKHGLQDFFRUGDQFHZLWKWKHUHJXODWLRQVRQWKHLQVWDOODWLRQRIHOHFWULFGHYLFHV7XUQLQJRQDQGXVLQJXQHDUWKHG
GHYLFHLVQRWDOORZHG)ROORZWKHUHTXLUHPHQWVVSHFL¿HGRQWKHGHYLFH¶VODEHOVWKDWLQGLFDWHGDQJHU
Warnings
•
&RQQHFWLRQRIHOHFWULFLW\DQGPDLQWHQDQFHRIWKHGHYLFHVKRXOGEHSHUIRUPHGE\WKHTXDOL¿HGSHUVRQQHORQO\DQGLQDFFRUGDQFHZLWK
WKHPDQXIDFWXUHU¶VLQVWUXFWLRQVDQGVDIHW\UHTXLUHPHQWV
•
,QRUGHUWRUHGXFHWKHULVNGXULQJLQVWDOODWLRQDQGPDLQWHQDQFHVXLWDEOHSURWHFWLYHFORWKLQJPXVWEHZRUQ
•
%HZDUHRIVKDUSDQJOHVZKLOHFDUU\LQJRXWLQVWDOODWLRQDQGPDLQWHQDQFHZRUNV
•
'RQRWWRXFKKHDWLQJHOHPHQWVXQWLOWKH\KDYHQ¶WFRROHGGRZQ
•
6RPHGHYLFHVDUHKHDY\\RXVKRXOGEHYHU\FDUHIXOZKLOHWUDQVSRUWLQJDQGLQVWDOOLQJWKHP8VHVXLWDEOHOLIWLQJHTXLSPHQW
• When connecting electricity to the mains, a circuit breaker of suitable size must be used.
Warning!
• If the device is installed in a cold environment, make sure that all connections and tubes are properly isolated. Intake and discharge air
ducts should be isolated in all cases.
• Openings of the ducts should be covered during transportation and installation.
•
0DNHVXUHQRWWRGDPDJHWKHKHDWHUZKHQFRQQHFWLQJWKHSLSLQJRIWKHZDWHUKHDWHU)RUWLJKWHQLQJXSXVHDZUHQFKVSDQQHU
Before starting up the device
• make sure, that there are no strange objects inside;
• manually check fans to make sure they are not stuck or blocked;
• if rotary heat exchanger is installed in the device, make sure that it is not stuck or blocked;
• check the earthling;
•
PDNHVXUHWKDWDOOFRPSRQHQWVDQGDFFHVVRULHVDUHFRQQHFWHGLQDFFRUGDQFHZLWKWKHZLULQJGLDJUDPRUSURYLGHGLQVWUXFWLRQV
Danger: Fumes
Salda Antifrost
V\VWHPXVHVGLVEDODQFLQJRIDQDLUÀRZDQGLWPD\FDXVHQHJDWLYHSUHVVXUHLQSUHPLVHV&DUHPXVWEHWDNHQZKHQXVLQJ
WKHGHYLFHLQWKHSUHPLVHVWRJHWKHUZLWKDQRWKHUKHDWLQJDSSOLDQFHWKDWGHSHQGVRQWKHDLULQWKHSUHPLVHV6XFKDSSOLDQFHVLQFOXGH
JDVRLOZRRGRUFRDO¿UHGERLOHUVDQGKHDWHUV¿UHSODFHVFRQWLQXRXVÀRZRURWKHUZDWHUKHDWHUVJDVKREVFRRNHUVRURYHQVWKDWGUDZ
the air in from the room and the duct-exhaust gases out through chimney or extraction ducting. The heating appliance can be starved
RIR[\JHQLPSDLULQJFRPEXVWLRQ,QH[FHSWLRQDOFDVHVKDUPIXOJDVHVFRXOGEHGUDZQRXWRIWKHFKLPQH\RUH[WUDFWLRQGXFWLQJEDFN
LQWRWKHURRP,QVXFKFDVHZHVWULFWO\UHFRPPHQGWRWXUQRႇ6DOGD$QWLIURVWDQGXVHDQH[WHUQDOSUHKHDWHUIRUKHDWH[FKDQJHUDQWLIURVW
protection (see
Salda Antifrost
function in the Remote Controller Operation Manual).
Содержание Smarty 2X P 1.1
