Salda Smarty 2X P 1.1, Монтаж и инструкция по установке

Страница: 2 / 44

2 | EN SMARTY XP v2020.3
1. CONTENT
2. SYMBOLS AND MARKING 3
3. SAFETY INSTRUCTIONS AND PRECAUTIONS 4
4. INFORMATION ABOUT THE PRODUCT 5
4.1. DESCRIPTION 5
4.2. DIMENSIONS AND WEIGHT 5
4.3. TECHNICAL DATA 6
4.4. OPERATING CONDITIONS 7
4.5. STANDART PACKAGE OF COMPONENTS 7
4.6. DESCRIPTION OF COMPONENTS 7
5. INSTALATION 8
5.1. RECEPTION OF GOODS 8
5.2. TRANSPORTATION AND STORAGE 8
5.3. UNPACKING 8
5.4. PIPING AND INSTRUMENTATION DIAGRAM 9
5.5. MOUNTING 10
5.6. UNIT PLACING AND MOUNTING POSITIONING REQUIREMENTS 10
5.7. CEILING-MOUNTING OF THE UNIT 11
5.8. CONNECTION OF THE AIR DUCT 11
5.9. CONNECTION OF THE UNIT TO ELECTRIC NETWORK 12
5.10. START-UP RECOMMENDATIONS 12
5.10.1. SYSTEM PROTECTION 12
5.10.2. PRE-STARTUP RECOMENDATIONS OF THE UNIT (IN THE PRESENCE OF THE ENDUSER) 12
6. MAINTENANCE 13
6.1. SAFETY INSTRUCTION 13
6.2. GENERAL RECOMMENDATIONS FOR THE MAINTENANCE OF VENTILATION SYSTEM 13
6.3. COVER OPENING 13
6.4. FILTERS MAINTENANCE 14
6.5. HEAT EXCHANGER MAINTENANCE 14
6.6. FAN MAINTENANCE 15
6.7. BYPASS DAMPERS MAINTENANCE 16
6.8. CONTROL BOARD MAINTENANCE 17
7. CONTROL 18
7.1. DEVICE CONTROL 18
7.2. DEVICE FUNCTIONS 18
8. ACCESSORIES 19
8.1. CONNECTION OF ACCESSORIES 20
8.1.1. HEATER AND PRE-HEATER 20
8.1.2. FIRE PROTECTION SIGNAL INPUT (FIRE PROTECTION INPUT (NC)) 27
8.1.3. EXTERNAL CO
2
/RH SENSORS 27
8.1.4. ROOM CO
2
TRANSMITTER INSTALLATION RECOMMENDATION 28
8.1.5. CO
2
CONCENTRATION ACCORDING TO PETTENKOFER LIMIT 28
8.1.6. CONECTION OF SUPPLY AND EXHAUST AIR DAMPERS 28
8.1.7. CONNECTION OF REMOTE CONTROL PANEL OR MODBUS 29
8.1.8. FIRE PLACE CONNECTION (SMARTY XP 1.1) 29
8.1.9. RECOMMENDED SCHEME FOR CONNECTION OF INTERNAL AND EXTERNAL COMPONENTS 30
9. POSSIBLE FAULTS AND TROUBLESHOOTING 35
10. ECODESIGN DATA TABLE 36
11. DECLARATION OF CONFIMITY 40
12. WARRANTY 41
12.1. LIMITED WARRANTY COUPON 41