Salda SMARTY 2R SLIMLINE, Руководство по эксплуатации

Страница: 10 / 16

Fig. 4
Screw four drilling screws in the corners of
the bracket, Fig. 4
Fig. 5
Mount the cover strip with two drilling
screws on the lower rear edge of the coo-
ker hood with the shorter part rolled up,
Fig. 5.
Fig. 6
Connect the mains connection and control
cable to the unit, Fig. 6.
Screw the hood on the bracket with four
drilling screws, Fig. 6.
Adjusting the pull-out front.
Fig. 7
Pull the front out completely. Undo the
screw for the front stop, which is located
on the underside of the cooker hood, and
the pull it as far towards the front as pos-
sible, Fig. 7.
Fig. 8
Slide in the front until it is correctly positio-
ned in relation to the cupboards, Fig. 8. Pull
out the front again and tighten the front
stop screw.
Changing front.
Fig. 9
10
991.0462.217/126215/2016-06-13