10
KF T120 EC
• All units are packed in the factory to withstand regular conditions of transportation.
• Upon unpacking, check the unit for any damages caused during transportation. It is forbidden to install damaged units!!!
• The package is only for protection purpose!
• While unloading and storing the units, use suitable lifting equipment to avoid damages and injuries. Do not lift units by holding on power supply
cables, connection boxes, air extract or exhaust flanges. Avoid hits and shock overloads. Before installation units must be stored in a dry room with
the relative air humidity not exceeding 70% (at +20 °C) and with the average ambient temperature ranging b5 °C and +30 °C. The place of
storage must be protected against dirt and water.
• The units must be transported to the storage or installation site using forklifts.
• The storage is not recommended for a period longer than one year. In case of storage longer than one year, before the installation it is necessary
to verify whether the bearings of fans and motor rotate easily (turn the impeller by hand) and if the electric circuit insulation is not damaged or the
moisture is accumulated.
• unpacking wear protective gloves.
• It is recommended to transport the product to the installation site in the original package.
• If you charge a person , pay attention to the weight of the product , which is written on the label.
KF-T120 F160/F180/F200 EC
KF-T120 F250/F280/B315/B355/B400 EC
H1
H2
L1
L1
W1
W1
H1
H2
W1
W1
L1
L1
H1
H2
L1
L1
W1
W1
H1
H2
W1
W1
L1
L1
KF-T120 EC
L1, mm
L2, mm
W1, mm
W2, mm
H1, mm
H2,mm
F160/F180
500
500
510
510
2030
740
F200
540
540
535
535
2120
770
F250/F280/B315
745
745
725
725
1855
975
B355/B400
825
825
725
725
2165
1130