P a g e
|
13
20-62 VHF & UHF TRANSMITTER
Product Manual
Sea Air and Land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand
March 2020
Configuring the 20-62 using Sacoto
Reading the configuration
The initial configuration must be read from the 20-62 or from a file saved on disk. This may then
be modified as required and written back to the 20-62.
Sacoto configuration screen after reading data from the 20-62 or from a file.
The configuration is arranged into various tabs along the top. Many of these are for advanced
functions or for specific protocols. These will not be described here however a full description can
be found in the Sacoto Help Menu.
Of most interest for getting the basics set up and running are:
Transmitter:
Frequency and power settings
Inputs:
Input triggered messages
System > Messages: Watchdog and battery messages
TCP/IP:
Ethernet configuration
Some of the tabs may change with later versions, but these basics will remain much the same.
Refer to the Sacoto Help for up-to-date descriptions.
