18
Pre-installation
Installation
PumpWise guidelines
General specification
Trouble shooting
PumpWise and warranty
General specification
Applications
All Salamander pumps are designed to
boost low pressure hot and cold supplies
from tank-fed services.
Voltage
220-240 volts 50 Hz.
Motor type
Capacitor start and run induction type
motor with stainless steel shaft and in-built
resetting thermal protection (complies
with BS5000 part 11).
Pump materials
All moulded components are manufactured
from Acetal Copolymer.
Maximum head
RP 50 TU and RP 55 SU 5 metres
All other pumps
10 metres
Pumps fitted with RCM3 maximum 3
metres static head.
Pump noise
With the technological advances achieved
in Right pumps, Salamander has taken
another step forward in the quest to
supply all our customers with even quieter
centrifugal pumps. Despite this no pump is
completely silent.
Correct installation will minimise vibration
and transmission noise.
Patents
Our Right range of pumps is protected
by following patent: Hydraulic Pump -
GB2402444
Mechanical seals
Scale deposits in water supplies can cause
the mechanical seal to stick if left for long
periods without use. We recommend the
pump be ran at least five minutes every
four weeks to ‘exercise’ all working parts.
Connections
3⁄4” BSP male.
Initiation
Fully automatic, flow switch operated,
requiring 1 litre in 30 sec per side or
2 litre in 30 sec mixed. Except Right
Universal pumps when required to operate
in negative
head mode.
Temperature
Maximum fluid temperature 60ºC.
Standards and approvals
Splash proof rating IPX2.
Complies with the requirements of current
British and European safety standards for
household and similar electrical appliances.
Complies with European Community
Directives (CE).
The company operate a policy of
continuous development and reserves the
right to change any of the specifications
of its products without prior notice. All
information data and illustrations given in
this leaflet may be subject to variation.