Salamander Pumps CT FORCE 15 PT Скачать руководство пользователя страница 17

15

Installation

General Specifications

Trouble shooting

PumpWise

Warranty

1  The Scope of the Warranty

SALAMANDER PUMPED SHOWER  
SYSTEMS LTD (“the company”) Warrants 
subject to the terms and conditions below 
for the Warranty period(s) specified in 
paragraph 3 that the Company shall:
Repair or replace free of charge the 
product(s) specified on the Warranty card 
or any component part thereof (together 
referred to as “the equipment”) which 
shall in the opinion of the Company have 
proved defective by reason only of the 
Company’s materials or workmanship 
providing always that the Company shall be 
under no obligation whatsoever under this 
Warranty to repair or replace equipment 
which shall have been misused modified 
altered or transformed in any way without 
the consent in writing of the Company or 
if any component or accessory shall have 
been replaced by a type not specified by the 
Company or if the equipment is incorrectly 
installed or operated or used other than as 
described in the instruction manual or if any 
servicing or repair of the equipment shall 
have been carried out otherwise than by an 
authorised Company dealer appointed by  
the Company (“dealer”).
The Company’s liability under this Warranty 
is limited to the said repairs or replacement 
and shall under no circumstances extend 
to any financial loss or damage including 
consequential losses alleged to have been 
suffered by the claimant.
Subject as provided in this warranty and 
except were the equipment is sold to a 

person dealing as a consumer all warranties, 
conditions or other terms implied by law  
are excluded to the fullest extent permitted 
by law.
Nothing in this warranty shall exclude liability 
for death or personal injury caused by the 
Company’s negligence.

2  Terms and conditions

This Warranty shall only be enforceable by 
you if the following terms and conditions 
have been complied with:
a   That the pump has been installed 

in accordance with the installation 
instructions, guidance and advice 
contained within the installation and 
warranty guide and/or provided by the 
Salamander help desk.

b   You are the original purchaser of the 

equipment from a dealer and not an 
assignee or subsequent purchaser of the 
equipment.

c   You must evidence the date of purchase 

by retaining the original invoice from 
the dealer. Without such evidence the 
Company reserves the right to reject 
any such claims under the terms of this 
Warranty.

d   Within 15 days of delivery of the 

equipment to you the Warranty card is 
accurately completed and returned to  
the Company.

e   Within thirty days of discovery of a defect 

giving rise to liability under paragraph 1 
above you give notice thereof in writing  
to the Company.

Содержание CT FORCE 15 PT





















Отзывы: