Sakura Cyto-Tek 2500, Руководство по эксплуатации

Страница: 22 / 44

3. OPERATING INSTRUCTIONS
Page 18
3. Insert a specimen chamber into the bottom of the
chamber holder. Press in firmly to properly seat the
specimen chamber. Press the chamber holder clip
down to make it engage the hooks at each side of
the chamber holder (Figure 3Q).
Figure 3Q
Align the opening of the specimen chamber with the
opening of the rubber gasket.
4. Dispense the specimen into the specimen
chamber up to the level line (6mL or 12mL). Fill the
specimen chamber exactly to the level line.
(Figure 3R).
Figure 3R
3.4 How to Load the Rotor
CAUTION: In order to minimize a risk of infection,
place the guard bowl inside a biological safety hood
when installing or removing the bowl lid.
CAUTION: Confirm that a name and ID on each glass
slide match those of individual patients or subject.
CAUTION: Load the Cyto-Tek 2500 Cytocentrifuge
rotor so that it remains balanced. An improperly
loaded, unbalanced rotor will cause the
cytocentrifuge to vibrate excessively. This can
shorten the life of the instrument.
1. Open the instrument lid to remove the guard bowl
unit.
2. Place the guard bowl inside a safety cabinet. To
unlock the lid, pull the lock button up on the top of
the lid (Figure 3S). Remove the lid (Figure 3T).
Figure 3S
Figure 3T
3. Load the rotor with an even number of assembled
chambers. Arrange them in the rotor so that pairs
of specimen chamber holder assemblies are
opposite one another (Figure 3U).
Figure 3U
6mL specimen chamber
Clip
Hooks
6/12mL chamber cap (option)
Level line
NOTE: An optional rubber
chamber cap is available for
centrifugation of infectious
specimens.
The illustration is the 6mL chamber.