Using Your Tea Maker
Note:
ONLY
fill the tea maker with water.
DO NOT
heat or boil other liquids.
Note:
To mute the tea maker, press
and hold the START/STOP button for
3 seconds. To indicate the tea maker
is muted, icon will read on the
temperature display.
To turn on the tea maker, plug the
power cord into the socket.
The control panel will automatically
turn on once plugged in.
Powering On
The tea maker will automatically
power off after 3 hours of inactivity. To
manually power off, press and hold the
POWER ON/OFF button
for 3 seconds.
Powering Off
Auto keep warm is the tea maker’s ability
to maintain the default temperature for
3 hours after a heating cycle. Once the
tea maker reached boiling temperature,
the tea maker will beep and automatically
activate keep warm. To indicate that the
keep warm is activated, the red light ring
will start pulsing effect.
Auto Keep Warm
If the tea maker has insufficient water
when starting a heating cycle, the tea
maker will automatically switch off
to protect from overheating and causing
damage. The tea maker will beep and the
temperature display will read “NO WATER” to
signify that the tea maker has boiled dry.
Allow the tea maker to cool for at least 10
minutes before refilling.
Boil Dry Protection
1. Plug in the tea maker base. Fill the
tea maker with the desired amount
of water. Put the teapot on top of tea
maker body and set the tea maker
on the tea maker base.
2. Press START/STOP to begin a heating
cycle. To indicate that the heating cycle
has started, the red light ring will
illuminate, and the tempereature display
will show current temperature as it rises.
3. When the water has reached the goal
temperature, the tea maker will beep
and automatically switch on the
keep warm function. The tea maker will
continue to keep warm the temperature
for 3 hours.
Heating Water
7
